8m Security All-in-One 60W Solar Streetlight with 2MP 4G Camera

The SOLARTODO 8m Security All-in-One 60W + Camera represents a paradigm shift in autonomous public infrastructure, merging high-efficacy street lighting with advanced security surveillance into a single, self-sufficient unit. Engineered for reliability in subtropical climates, this integrated system eliminates the need for grid power and complex trenching, offering a sustainable and rapidly deployable solution for municipalities, commercial properties, and critical infrastructure.

At its core, the system combines a 60W high-lumen LED luminaire with a 2-megapixel (MP) infrared (IR) 4G camera, all powered by a state-of-the-art 180Wp photovoltaic (PV) module and a 720Wh Lithium Iron Phosphate (LFP) battery. Mounted atop a robust 8-meter hot-dip galvanized steel pole, the unit is designed for a minimum 30-minute installation time and a service life exceeding 10 years, delivering an unparalleled combination of performance, longevity, and low total cost of ownership.

The "All-in-One" architecture is a cornerstone of the product's design philosophy, integrating the solar panel, battery, charge controller, LED module, and camera into a single, streamlined housing. This approach offers significant advantages over traditional split-type solar lighting systems, including 80% faster deployment (30 minutes vs. 2-4 hours per pole), no external wiring requirements, sleek minimalist aesthetics, and significantly lower theft risk with the integrated battery positioned at the pole top.

The system utilizes a 180-watt peak (Wp) monocrystalline solar panel based on Tunnel Oxide Passivated Contact (TOPCon) technology. This advanced cell structure allows for efficiencies between 19% and 23%, significantly outperforming conventional PERC cells. The panel is certified to IEC 61215 and IEC 61730 standards, ensuring its performance and safety over a 25-year design life. In a typical subtropical location with 4.5 peak sun hours, the 180Wp panel can generate approximately 810Wh of energy per day, fully recharging the 720Wh battery in a single sunny day.

Energy storage is managed by a 720Wh Lithium Iron Phosphate (LiFePO4 or LFP) battery pack. LFP chemistry is chosen for its superior safety, thermal stability, and exceptional cycle life, capable of over 2,000 deep discharge cycles to 80% depth of discharge (DOD). This translates to a usable battery lifespan of 5-7 years under typical operating conditions. The integrated Battery Management System (BMS) provides comprehensive protection against overcharge, over-discharge, short circuits, and thermal runaway.

An advanced Maximum Power Point Tracking (MPPT) charge controller optimizes the energy transfer from the solar panel to the battery. With a tracking efficiency exceeding 98%, the MPPT controller actively adjusts its operating point to harvest up to 30% more energy compared to older PWM controllers, especially during overcast conditions.

The luminaire delivers a powerful 60 watts of LED power, utilizing high-performance chips from industry leaders like Bridgelux or Lumileds. These chips boast an exceptional luminous efficacy of over 170 lumens per watt, resulting in a total light output of approximately 10,200 lumens. This level of brightness is suitable for illuminating roadways, parking lots, and public squares. The LED module is designed for a 50,000-hour operational life (L70), equivalent to over 11 years of 12-hour nightly operation. The entire luminaire assembly is compliant with IEC 60598 and rated IP66.

Seamlessly integrated into the luminaire housing is a 2-megapixel (1080p) security camera, providing high-definition video surveillance 24/7. An embedded 4G LTE module allows for real-time video streaming and remote access to footage from any internet-connected device. Built-in IR illuminators provide clear black-and-white video in complete darkness up to a range of 30 meters. The camera includes sufficient internal storage for 7 days of continuous recording, ensuring footage is retained even if the 4G connection is interrupted.

The system employs a multi-layered control strategy to maximize energy efficiency and operational reliability. The primary mode is dusk-to-dawn, where an ambient light sensor automatically activates the luminaire at sunset and deactivates it at sunrise. To conserve energy and extend autonomy, the system incorporates a time-based dimming schedule. A typical profile might be 100% brightness for the first 4 hours, dimming to 30% during low-traffic mid-night hours, and returning to 100% for 2 hours before dawn. This strategy alone can reduce nightly energy consumption by over 50%.

The structural integrity of the system is anchored by the 8-meter pole, constructed from Q235 steel and protected by a hot-dip galvanization process compliant with ASTM A123. This coating provides superior corrosion resistance, essential for long-term exposure in humid subtropical environments. The pole is engineered to withstand wind speeds up to 150 km/h. The entire all-in-one unit is designed to operate within a temperature range of -20°C to +60°C, ensuring reliable performance year-round.