SOLARTODO | Reverse start, feedback and stop English recording script • Bench replay, 13 November 2026 00:00 – 00:07 In the owner App, open Control. Check the name, Demo Field Pivot, and the travel status, Stopped. 00:07 – 00:09 Now open Manual Control. 00:09 – 00:14 Under Travel control, tap Reverse. The status still says Stopped. 00:14 – 00:20 Command 117 set the direction. All three travel contacts are still open. 00:20 – 00:24 Tap Start in reverse. Check the machine name and direction in the review. 00:24 – 00:33 Tap Confirm reverse start once. The request is in. Now wait for the contacts. 00:33 – 00:38 There it is: Running in reverse. The run and reverse contacts are both closed. 00:38 – 00:44 The forward contact stayed open. That is the bench feedback for command 118. 00:44 – 00:49 Tap the red Stop button once. Watch the travel status return to Stopped. 00:49 – 00:56 On command 121, both travel contacts released. All eight controller outputs were off. 00:56 – 01:02 In the admin console, open Equipment, choose the pivot, and find Control receipts and input feedback. 01:02 – 01:12 Find Start travel, Reverse. Match the command ID, then read across: Field feedback confirmed. Contact feedback. 01:12 – 01:17 The two end-gun tests sit between start and stop in this session. 01:17 – 01:27 Find Stop travel and match its ID. Both the owner and admin receipts confirm the stop. All eight inputs were open.