WEBVTT

00:00:00.000 --> 00:00:07.280
In the owner App, open Control. Check the name, Demo Field Pivot, and the travel status, Stopped.

00:00:07.280 --> 00:00:09.000
Now open Manual Control.

00:00:09.000 --> 00:00:14.384
Under Travel control, tap Reverse. The status still says Stopped.

00:00:14.384 --> 00:00:20.000
Command 117 set the direction. All three travel contacts are still open.

00:00:20.000 --> 00:00:24.991
Tap Start in reverse. Check the machine name and direction in the review.

00:00:24.991 --> 00:00:33.000
Tap Confirm reverse start once. The request is in. Now wait for the contacts.

00:00:33.000 --> 00:00:38.297
There it is: Running in reverse. The run and reverse contacts are both closed.

00:00:38.297 --> 00:00:44.000
The forward contact stayed open. That is the bench feedback for command 118.

00:00:44.000 --> 00:00:49.419
Tap the red Stop button once. Watch the travel status return to Stopped.

00:00:49.419 --> 00:00:56.000
On command 121, both travel contacts released. All eight controller outputs were off.

00:00:56.000 --> 00:01:02.947
In the admin console, open Equipment, choose the pivot, and find Control receipts and input feedback.

00:01:02.947 --> 00:01:12.000
Find Start travel, Reverse. Match the command ID, then read across: Field feedback confirmed. Contact feedback.

00:01:12.000 --> 00:01:17.069
The two end-gun tests sit between start and stop in this session.

00:01:17.069 --> 00:01:27.000
Find Stop travel and match its ID. Both the owner and admin receipts confirm the stop. All eight inputs were open.

